SKF STO 50 bearing
SKF Bearing Survise
Get STO 50 Price
Other models SKF bearing in stock
- Bearing Model
- In Stock
- Mail Inquiry
Y-bearing take-up units - TU 50 FM - SKF
d, 50, mm. A, 49, mm. A1, 17.5, mm. A2, 36, mm. A5, 29.5, mm. B, 30.2, mm. H, 117, mm. H1, 101, mm. H2, 83, mm. L, 149, mm. L1, 90, mm. L2, 16, mm. L3, 86, mm. N, 29, mm. N1, 19, mm. N2, 49, mm. s1, 32.7, mm. Threaded hole. RG, 1/4-28 UNF. R1, 4, mm. Rα, 30, °. Grease fitting. DN, 6.5, mm. SWN, 7, mm. GN, 1/4-28
Y-bearing square flanged units - FY 50 TF - SKF
d, 50, mm. A, 43, mm. A1, 15, mm. A3, H14, 3.2, mm. A5, 29.5, mm. B, 51.6, mm. Da, H11, 125.4, mm. Db1, 107, mm. Db2, 118, mm. J, 111, mm. L, 143, mm. N, 18, mm. s1, 32.6, mm. T, 60.6, mm. Threaded hole. RG, 1/4-28 UNF. R1, 28.5, mm. Grease fitting. DN, 6.5, mm. SWN, 7, mm. GN, 1/4-28 SAE-LT. Dowel pins.
Y-bearing square flanged units - FY 50 LF - SKF
d, 50, mm. A, 43, mm. A1, 15, mm. A3, H14, 3.2, mm. A5, 29.5, mm. B1, 46, mm. Da, H11, 125.4, mm. Db1, 107, mm. Db2, 118, mm. J, 111, mm. L, 143, mm. N, 18, mm. s1, 27.5, mm. T, 55.5, mm. Values for B1 and s1 before the grub screw is tightened (sleeve and inner ring bore at starting position). Threaded hole.
Support rollers without flange rings, with an inner ring - STO 35
STO 35. Dimensions. D, 72, mm. d, 35, mm. C, 19.8, mm. B, 20, mm. E, 50, mm. F, 42, mm. r1,2, min. 0.6, mm. r3,4, min. 0.6, mm what is provided under Support rollers. For information on selecting the appropriate bearing for a given application, and interpreting the data on this page, refer to Bearing selection process.
Bearing data - SKF
(R)NA 22 designs. ISO 15, dimension series 22, except for the outer ring width; NATR, NATV, NUTR .. A, PWTR designs. ISO 7063 and ANSI/ABMA Standard 18.1 (where standardized); (R)STO designs. Not standardized. Profile of the outer ring running surface. (R)STO, (R)NA 22, NATR, NATV designs. Radius = 500 mm
Needle roller bearing catalogue - SKF
d = 10 – 50 mm. Can be combined with radial needle roller bearings to accommodate combined radial and axial loads. Bearing design. Bearing washers . Bearing design. Support rollers. Designation series. Outside diameter range. Characteristics. Without flange rings, (R)STO and (R)NA 222RS designs. STO .. TN.